Butterfly Design Acrylic Embossing Template for Polymer Clay, Earring Making Tools, Fondant Tools

Description

Butterfly Design Acrylic Embossing Template for Polymer Clay, Earring Making Tools, Polymer Clay Tools, Clay Earring Design, Acrylic Embosser Stamp, Cake Fondant Tools
Template Design #211

This listing is for an acrylic embosser template in the design of BUTTERFLY.
You can use acrylic stamps with polymer clay, cake fondant as well air dry clay, ceramic clay, etc. Make sure your dough is not very soft, otherwise your dough may be caught inside the cavities. It is made from strong acrylic material and lasered design.
Along with this template, you will receive a small misting bottle of water and a piece of foam just like in the following video:

ACRYLIC TEMPLATE TUTORIAL:

Laser-engraved acrylic texture mats enhance your artwork. The design cavity is 1.5 mm engraved on 3 mm thickness acrylic. The template measures 4 inches wide and 4 inches high.
The measurements written on the product name are the stamp’s outer frame dimensions; not the design itself.
Acrylic stamp edges may be very sharp. Pay attention when handling them.

Some slight warping can happen in the process of making these templates. It doesn’t affect the quality or design of the outcome. Just make sure to press firmly on all the surfaces to get your desired design.

FOR CAKE FONDANT: Please make sure to set your fondant out for a while to harden a bit before rolling the stamp on it.
Whether you use fondant or clay; you can simply brush some cornstarch onto the stamp ( remove the excess with a brush ), so you can easily peel the design off the stamp.

*Please see the YouTube video below on how to work with this template

*ALL MATERIALS ARE FOOD CONTACT GRADE & NEED TO BE HAND WASH ONLY
*KEEP AWAY FROM SUNLIGHT, AND HEAT SOURCES. DO NOT PLACE IT IN THE DISHWASHER

*IMPORTANT INFORMATION-PLEASE READ*
Acrylic material warms up a lot during laser engraving. So the acrylic stamp gets slightly domed ( dimpled in the center ), especially during the heavy engraving laser process for very detailed and dense designs. This is normal.
Make sure to roll in every direction to even out the print. With a roller, roll up and down, side to side, as well as across.
Also, press hard on the stamp in every direction to even the prink onto your dough. In the middle section of the plate, take your roller end and firmly push down to get the print just right.

*SHIPPING POLICY:
DPC ships mostly via USPS priority mail but on occasion will ship out via USPS ground mail. Mailing times can vary from 3-7 days.  DPC is only responsible for your package until tracking states it has been “Delivered”.
DPC is not responsible for any lost or stolen packages.

*INTERNATIONAL SHIPPING:
DPC currently ships internationally to Canada & United Kingdom only.
Shipping costs will vary but could start at $27 and go up from there.
I would not be responsible for customs charges. Just be aware that shipping could be delayed and take up to 30 days.

*FOLLOW ME:
Instagram & Tik Tok: @madebydpc
YouTube: https://www.youtube.com/channel/UCahc0SkG8ehw5WrLcSZJuFQ

THANK YOU FOR SHOPPING WITH US!!!!