Valentine Designs Acrylic Embosser Template For Polymer Clay-Bundle Option

Description

Valentine Designs Acrylic Embosser Template For Polymer Clay or Cake Fondant, Clay Tools, Polymer Clay Earrings, Acrylic Template Design, Acrylic Debosser, Cake Fondant Design, Cake Decorating
(paid partnership with www.pakumalzeme.com)

This listing is for any Valentine stamp template for polymer clay, quick-dry clay, or cake fondant.
You can purchase them separately or as a bundle set.
These templates are made from strong acrylic material and lasered design.

Here are the Valentine Designs available:

Rainbow Gnomes
Flying Hearts
Conversation Hearts
Bundle of 3 option

Along with this template, you will receive a small misting bottle of water and a piece of foam just like in the following video:

ACRYLIC TEMPLATE TUTORIAL:
https://www.youtube.com/shorts/oS5

Laser-engraved acrylic texture mats enhance your artwork. The design cavity is 1.5 mm engraved on 3 mm thickness acrylic. The template measures 4 inches wide and 4 inches high.
The measurements written on the product name are the stamp’s outer frame dimensions; not the design itself.
Acrylic stamp edges may be very sharp. Pay attention when handling them.

You can use acrylic stamps with polymer clay, cake fondant as well air dry clay, ceramic clay, etc. Make sure your dough is not very soft, otherwise your dough may be caught inside the cavities.

FOR CAKE FONDANT: Please make sure to set your fondant out for a while to harden a bit before rolling the stamp on it.
Whether you use fondant or clay; you can simply brush some cornstarch onto the stamp ( remove the excess with a brush ), so you can easily peel the design off the stamp.

HOW TO USE THESE TEMPLATES:

*ALL MATERIALS ARE FOOD CONTACT GRADE & NEED TO BE HAND WASH ONLY
*KEEP AWAY FROM SUNLIGHT, AND HEAT SOURCES. DO NOT PLACE IT IN THE DISHWASHER

*IMPORTANT INFORMATION-PLEASE READ*
Acrylic material warms up a lot during laser engraving. So the acrylic stamp gets slightly domed ( dimpled in the center ), especially during the heavy engraving laser process for very detailed and dense designs. This is normal.
Make sure to roll in every direction to even out the print. With a roller, roll up and down, side to side, as well as across.
Also, press hard on the stamp in every direction to even the prink onto your dough. In the middle section of the plate, take your roller end and firmly push down to get the print just right.

FOLLOW ME:
Instagram & Tik Tok: @madebydpc
YouTube: https://www.youtube.com/channel/UCahc0SkG8ehw5WrLcSZJuFQ

THANK YOU FOR SHOPPING WITH US!!!!